Share This Post

Uncategorized

Tuya ZigBee Smart Human Presence Sensor Human Micro-motion Motion Detector Infrared Radar Detection Light Sensor Needed Gateway

Tuya ZigBee Smart Human Presence Sensor Human Micro-motion Motion Detector Infrared Radar Detection Light Sensor Needed Gateway


Price: [price_with_discount]

Tuya ZigBee Smart Human Presence Sensor Human Micro-motion Motion Detector Infrared Radar Detection Light Sensor Needed Gateway

Description:

Product Name: Human Presence Sensor

Wireless connection: Zigbee

Working voltage: DC 12V

Working current: <70mA

Working temperature: -20℃ ~ 70℃

Sensitivity: 0-9 (default 7)

Detection distance: 0.3- 9m (default distance 6m)

Delay time:

Parameter 1: target detection confirmation time: 0~10s;

Parameter 2: Target disappearance delay time: 0.5s~25min; it is recommended not to be less than 15 seconds, too small is easy to miss the report

Light sensitivity: 0~ 2000Lux

Installation method: ceiling

Product size: ○92*30

Specifications:

【Communication protocol】 ZigBee, it needs to be used with the gateway

【Function introduction】 Real-time detection of whether someone exists, micro-motion detection (heartbeat, breathing, etc.), motion detection

【Intelligent linkage】 It can create intelligent scenes together with Tuya switches, lamps, curtains and other intelligent products to achieve energy saving, environmental protection, security alarm and other functions.

【Difference from traditional human PIR infrared sensor】

PIR infrared sensors can only detect human motion, but cannot detect when people are still, and the false alarm is serious.

The human presence sensor adopts the principle of radar microwave, and has the functions of human presence, human stillness, human micro-motion and human motion detection.

【Can detect the brightness of the light】

Package Included:

Human presence sensor xl

instruction x1

Notes:

Installation Notes

a. According to the scope and shape of the detected area, select the appropriate installation position on the ceiling to ensure that the detection area can be effectively covered;

b. The diameter of the equipment panel is 93mm, the rear rectangular part is 65X70mm, and a circular hole with a diameter of 80mm is opened on the ceiling;

c. Clamp the power and signal wires on the equipment (lightly clamp the wires, otherwise the wires will be easily broken and lead into the ceiling openings;


[price_with_discount] 46.48

Share This Post

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>